28/32W 6700K - 12 11/16 Inch - Square Pin Base - Coralife

Item Code 54090
* 6,700K are a high intensity daylight lamp. Simulates midday sun on a bright sunny day.
* They are not as visually "bright" as an 8,800K or 10,000K, but their spectrum is more balanced for most invertebrates. What does that mean exactly? It means there are more varied "wavelengths of light" put out by this bulb, more in the orange, red, green and yellow spectrum compared to higher K bulbs.
* An excellent light to grow corals and both marine and freshwater plants.
* Promotes the growth of zooxanthellae algae, essential for the growth and well being of all photosynthetic corals and invertebrates.
* Panasonic style "Square Pin" socket (GY10q).
* 12 11/16" overall length, 14 3/16" with moisture resistant end cap.
* Works in any standard 28W OR 32W Square Pin fixture.
* Note: Bulbs are stamped "28W", but they will work fine in 32W fixtures. It's the ballast that drives the bulb, so if you have a 32W ballast, a 28W bulb will run at 32W and vice versa.

Dimensions:

12 11/16" overall length, 14 3/16" with moisture resistant end cap.

Whats in the box:

1- 28W / 32W 6700K Square Pin CF Lamp

Availability:

Usually Ships same business day

Warranty:

30 Days

Other Info:

*** FAQ***
Q. Are these bulbs 28W or 32W?
A. (Note: This applies to both Compact Fluorescent and Fluorescent bulbs only.) Actual wattage to the lamp is primarily a factor of the lamp electrical characteristics and the ballast driving the lamp. Without getting too technical, the wattage marking on the lamp does not necessarily determine the actual wattage to the lamp. (i.e. you could have 96W to a lamp that is marked 28W!!) Fixtures with different ballast will have different wattage to the lamp and as such the wattage marking on the lamp is for reference only.
Actual wattage to the lamp operated by electronic ballast can only be measured using special high frequency wattage measuring equipment. Input wattage to the ballast is not a direct indication of wattage to the lamp.
Simply put, 28W and 32W lamps have same or similar electrical characteristics and therefore if one replaces either lamp into a given fixture (either a 28W or 32W system) then the wattage to the lamps will be driven by the ballast(s) of such system. Wattage to the lamp determines lumen output or total light output of the lamp.
Conclusion: Lamps marked 28W or 32W can be interchanged with similar or equivalent light output performance. The ballast drives the bulb.
Q. What's the difference between all the daylight bulbs?
A. Heres the best way to summarize it:
5,000K = Warm daylight, slight hint of yellow when fired next to a 10,000K. Great for freshwater fish and plant tanks.
6,700K = Nice white, not as visually bright as a higher K bulb. Not as yellow as a 5,000K, also great for freshwater fish and plants.
8,800K = Strong, bright, crisp light, comparable to 10,000K.
10,000K = Bright crisp white light.
General CF Questions.
Q. I don't see a particular color temp (K) or base style (Square / Straight pin) that I am looking for. Can you get it?
A. We stock the most popular color temps and bases available. We also can have a new style bulb made, if demand warrants. Let us know what you're looking for. If we get enough requests, we'll try and source it, or have it made.
Q. My CF bulbs keep breaking, why is that?
A. We'd suspect that your lamp clips are too tight. Stretch them out lightly. The most common breaks we hear about are on the ends of the 2 tubes, where they are connected. This is a fragile area, and it can crack if you are not careful.
Q. What is better, Square Pin or Straight Pin??
A. This is a matter or opinion. But, Square pin is the more popular of the two. Square pin is also a little longer and wider than straight pin, so theoretically, you'd get more surface area that's lighting your tank.
To avoid problems with CF bulbs & ballasts, we recommend:
1) Mount electronic ballasts as far away from heat sources as possible (this would include bulbs as a heat source).
2) Do not mount ballasts in any high humidity areas (ie. above sump, etc).
3) Avoid unnecessarily removing Compact Fluorescent bulbs once they are in place. Glass bulbs are fragile, so take care when handling them.
4) Make sure they are pushed all the way into their sockets.
5) Mount behind glass or acrylic 3-6" above the water. Do NOT operate any bulb directly over exposed water!
6) Securely mount all endcap cords, as loose cords can be pulled on accidentally, resulting in bulb breakage.
7) Most photo periods are between 8-12 hours, depending on specimen needs.