Item Code: 50000
* This kit has no flimsy parts!
* The reflector is our Parabolic Polished Aluminum Mirror reflector.
* Compare the others, and then buy the BEST!
* Pulse Start ballast.
* Wiring instructions are on the ballast.
* Note: this kit will require wiring done by a qualified electrician. We suggest purchasing 18 gauge wire to aid in installation.
* Optional: We offer High Temperature wire nuts as an option, so you know you are getting the correct ones safe for installation. High temperature wire nut connectors are rated to 302 degrees Fahrenheit. Made specifically for high wattage HID applications.
* Caution: This retrofit/ballast kit must be housed in an area free of moisture, behind glass. Make sure the bulb(s) and socket(s) are sealed off from any moisture, humidity or evaporation when mounted over your aquarium. Mount ballast(s) away from moisture, humidity or evaporation. Failure to do so will void any and all warranty, and could be a potential hazard.
Ballast Specifications
* Manufacturer: Universal/Magnetek
* Model # M150MLTLC3M718C / Description: 1-150w MH M102 Quad 60Hz C&C
* Magnetic HID core and coil.
* INCLUDES: M102 ballast, ignitor, capacitor and bracket kit welded to the base, for easy mounting. Others sell you just the raw ballast, don't be fooled! Ours come with the bracket kit already installed! Screws for mounting are not included.
Ballast Specifications
Lamp type: 150W Metal Halide (medium mogul base)
ANSI Designation: M102
Input Voltage: 120
Circuit Type: HX-HPF
Watts Input: 185
Max Input Current: 3.32
Nom Open Circuit Voltage: 245
Fuse Rating: 10
Reflector Specifications
* Parabolic Polished Aluminum Mirror Reflector.
* Dimensions: 16" x 13" x 5" (L x W x H)
FAQ:
Q. What is the difference between these new Magnetic Ballast Systems and the Electronic Ballast Systems?
A. Wiring the electronic ballast is MUCH simpler than the magnetic ballast. Also, the electronic ballasts are energy saving - up to 25% over magnetic ballasts, extended bulb life up to 25%, provide consistent lamp color, uniform lumen output, reduced Lamp flicker, operate at cooler temperatures and are silent in operation (magnetic ballasts tend to "hum" while running.
Q. How blue is 50,000K???
A. The color temp "rating" of 50,000K is not a scientific measurement. The blue looks like a nice 20,000K bulb, in our humble opinion.
Q. What is the difference between a "probe start" and "pulse start" ballast?
A. Without getting technical, a "pulse start" ballast has an ignitor which helps start the lamp, while the "probe start" does not have an ignitor. Most ballasts sold in MH fixtures here in the U.S. are "probe start" (ANSI: M57, M58 or M59).
Hellolights highly recommends the use of a ground fault circut interrupter with all of the lighting equipment we offer. With the correct installation and proper precautions taken you can avoid electrical shock or electrocutions.