Item Code: 6060003

* Note: Wire Harness will only work with Hellolights.com Model 4LX VHO ballasts. They will NOT work with other manufacturers ballsts OR our ARO AS-220 VHO raw ballast.
* Quick Disconnect for ARO Model 4L VHO Ballasts.
* Pre-wired with German Moisture Resistant end caps.
* Will fit 1.5" T-12 VHO, HO, NO bulbs.
* Rubber o-ring to help protect socket from humidity and moisture from your aquarium.
* Mounting screws are included. The 3 piece design allows easy bulb replacement, as once the base is screwed into place, you only have to unscrew the middle ring to remove the bulb.
Warning: Insufficient contact between any bulb and its socket can result in an electrical arc, and possible damage to the bulb and socket. MAKE SURE you have a firm contact with ALL:
Metal Halide HQI bulbs & sockets.
CF/VHO/HO/NO fluorescent bulbs and sockets. Fluorescent bulbs should never be operated if they are positioned at an odd angle in the socket, and should be mounted perpendicular to the socket face.
Call us toll free (877-995-2677) if you do not understand this. Thank you.

FAQ:
Q. Does this wiring harness include the plastic stand-off mounts?
A. No. This harness comes wired with the German 3-Piece endcaps only. The stand-off mounts (Item code #60-60250) are sold separately.
Q. Will this work on the ARO AS-220 VHO ballast??
A. No. This will only work on the ARO model 4L ballast.