Item Code: 4040012
Included in our PRE-WIRED Retrofit Kits:
* Electronic ARO Model 4LX VHO Ballast
* Ballast Dimensions: 11 3/4"(L) x 3”(W) x 2”(H)
* German 3 piece moisture resistant endcaps.
* Polished mirror aluminum reflector.
* Quick Disconnect Cable: 7 ft
* Power Cord: 7 ft
* Wire Harness: 6 ft
* Assembled dimensions with endcaps and bulbs: 48 5/8"L x 10"W x 2 3/4"H
***Now Available: Upgrade your kit to include TWO ARO Model 4LX ballasts, so you can have "dusk/dawn" control over your VHO lights! If you select the upgrade, you will get TWO VHO ballasts with TWO 2 lamp wiring harnesses, so you can control 2 lamps on each ballast!
* 48" 4 Lamp VHO Retrofit kit for 440W of power!
* This VHO Retrofit Kit is pre-assembled and wired on our Polished Aluminum Mirror Reflector to save you time. All you have to do is insert bulbs, mount it into your existing reflector, canopy or hood, and turn it on. Thats it! No complex and confusing wiring diagrams.
* Polished Aluminum Mirror Reflector reflects up to 99%! These reflectors come with a thin blue protective film to prevent scratches. Be sure to remove this film before you mount and light up the unit.
* Extreme intensity and reliability is guaranteed. Backed by a 1 year warranty on the ballast.
* Exceptionally energy efficient electronic ballast with potted design for cooler and moisture resistant operation.
* Has 1/4" holes on ballast case for easy mounting.
* Each VHO ballast can power up to 440 watts of light (with maximum of 16 feet of lamp length). Thus, EACH ballast is capable of running 2, 3 or 4 bulbs if the 440 watt / 16 foot limit is adhered to (Note: the proper lamp harness must be used to operate 2, 3 or 4 bulb configurations).
* This is an in-series product; thus, if you choose to use the 4 bulb harness, all four bulbs will be either "On" or "Off" at the same time.
* Endcaps are high quality 3 piece moisture resistant units and are German made. These have an O Ring to help keep the moisture out.
* Ballasts are not dimmable (Fluorescent bulbs are NOT designed to be dimmed!).
* VHO ballasts are not compatible on X-10 systems.
Warning: To avoid damage to your system, make sure the lamps are seated firmly in the 3 piece endcaps and the connection between the lamp harness and ballast is pushed all the way together. Any connection that is not made firm can cause an ARC, potentially causing damage/failure to your system. If you are not sure how to properly install the lamp, please call us toll free at 866-969-7333 or 866-WOW-REEF. Damage caused by an arc is not covered under warranty.
* Caution: This retrofit/ballast kit must be housed in an area free of moisture, behind glass or acrylic. Make sure the bulb(s) and socket(s) are sealed off from any moisture, humidity or evaporation of your aquarium. Failure to do so will void any and all warranty, and could be a potential hazard.
* Note: the VHO ballasts come with a small white sticker that says "4x48" or "4x48w" on the bottom. This does not mean "48 watts", but rather means 4x 4 foot bulbs can be used.
*** FAQ:
Q. How many watts will the 48" 2, 3 and 4 bulb VHO Retrofit Kits power?
A. The 2x 48" kit will operate 2x 110W VHO bulbs, for a total of 220W The 3 bulb kit will run 330W, and the 4 bulb kit will run 440W.
Q. My bulbs didn't come on this morning, what happened?
A. Since these ballasts operate on a "serial" connection, all bulbs must be working for the unit to work. You can test your individual bulbs by connecting the solid RED wired endcap, and the solid BLUE wired endcap to each end. This will "complete the serial connection", and will light the bulb if it's good.
Q. Can the reflector be easily cut or modified?
A. Yes. The reflector is easily cut with tin snips. It can also be drilled without problems. Remember though, that we will not accept any returns for items you have modified, so please make sure you're going to use it if you plan on cutting, drilling, bending, etc...
Q. Can I use Normal Output (20W, 30W, 40W, etc...) "N.O." bulbs with the ARO VHO ballast?
A. Yes. You can run any "NO" bulb you want on the ARO ballast. It will drive them at near VHO levels. This is great for those who want to run cheaper "Gro bulbs" from Wal-Mart, Lowes or Home Depot on a refugium, algae scrubber or tank. The ARO ballast is versatile, and you can run any combination of NO, HO and/or VHO bulbs.
Hellolights highly reccomends the use of a ground fault circut interrupter with all of the lighting equipment we offer. With the correct installation and proper precautions taken you can avoid electrical shock or electrocutions.