Item Code: 20050
* A raw metal halide ballast for the DIY Reefer!!!
* The ultimate lighting for the Nano Reefer, 70W of metal halide HQI!!!
* Made for a 70W HQI bulb.
* Model # M70MLTLC3D / Description: 1-70w MH M85 Quad 60Hz
* Magnetic HID core / coil ballast with ignitor only, you will have to wire this to your power cord and HQI sockets (sold separately).
* INCLUDES: M85 ballast, capacitor, ignitor and bracket kit welded to the base, for easy mounting. Others sell you just the raw ballast, don't be fooled! Ours come with the bracket kit!
* Pulse Start ballast.
* Note: this ballast will require wiring done by a qualified electrician. We suggest additional wire nuts, and 18 gauge wire to install properly.
* Optional: We offer High Temperature wire nuts as an option, so you know you are getting the correct ones safe for installation. High temperature wire nut connectors are rated to 302 degrees Fahrenheit. Made specifically for high wattage HID applications.
* Wiring instructions are on the ballast.
* Caution: This ballast must be housed in an area free of moisture, behind glass. Mount away from areas of water, humidity or evaporation. Failure to do so will void any and all warranty, and could be a potential hazard.
We've had a few questions about these ballasts looking "used". These ballasts are industrial grade, and thus, they are not shiny and new looking. The ballasts we sell are fresh from the factory and 100% brand new. They're not a best looking item we sell, but they are reliable HID workhorses!
Ballast Specifications
Lamp type: 70W Metal Halide HQI Double Ended
ANSI Designation: M85
Input Voltage: 120
Circuit Type: HX-HPF
Watts Input: 95
Max Input Current: 1.70
Nom Open Circuit Voltage: 245
FAQ:
Q. What sockets should I use for this 70W HQI ballast?
A. Use the 70W / 150W HQI Deluxe spring loaded sockets, with or without mounting bracket, as shown above in the "Companion Products" link. The mounting bracket spaces the sockets for you, and saves you time when mouting them.
Q. What is the difference between these new Magnetic Ballast Systems and the Electronic Ballast Systems?
A. Electronic ballast is smaller and higher performance than the magnetic ballast.
Q. What is the difference between a "probe start" and "pulse start" ballast?
A. Without getting technical, a "pulse start" ballast has an ignitor which helps start the lamp, while the "probe start" does not have an ignitor. Most ballasts sold in MH fixtures here in the U.S. are "probe start" (ANSI: M57, M58 or M59).
Note: For "3 Day Select", "2nd Day" or "Next Day Air" on this item, you will be charged actual shipping. This will be added to your order after it is placed, and will NOT appear on your checkout page. Please call us if you have any questions.